%
%  LaTeX Template for EUCASS 2025
%
\documentclass[a4paper,twoside]{article}
\usepackage{etex}
\usepackage[T1]{fontenc}
\usepackage[latin1]{inputenc}
\usepackage[english]{babel}
\usepackage{graphicx}
\usepackage[noindentafter,pagestyles]{titlesec}
\usepackage{textcomp}
\usepackage{dcolumn}
\usepackage{amsmath}
\usepackage{txfonts}
\usepackage{fancyhdr}
\usepackage{threeparttable}
\usepackage{xspace}
\usepackage[superscript]{cite}
\usepackage{subfigure}
\usepackage{pictex}
%
\setlength{\textwidth}{166mm}
\setlength{\textheight}{242mm}
\setlength{\oddsidemargin}{-3.4mm}
\setlength{\evensidemargin}{-3.4mm}
\setlength{\topmargin}{-10mm}
\setlength{\parindent}{\leftmargini}
%
\newcommand{\bmp}[1]{\begin{minipage}{#1\columnwidth}}
\newcommand{\emp}{\end{minipage}}
\newcommand{\bm}[1]{\mbox{\boldmath$#1$\unboldmath}}
\newcommand{\bea}{\begin{eqnarray}}
\newcommand{\eea}{\end{eqnarray}}
\newcommand{\be}{\begin{equation}}
\newcommand{\ee}{\end{equation}}
\newcommand{\eline}{\\}
\newcommand{\fr}[2]{{\textstyle \frac{#1}{#2}}}
\newcommand{\frs}[2]{{\scriptscriptstyle \frac{#1}{#2}}}
\newcommand{\mystrut}[1]{\rule{0 mm}{#1 mm}}
%
\titleformat{\section}{\large\bfseries}{\thesection.}{.3em}{}
\titlespacing*{\section}{\leftmargini}{*3}{*3}
\titleformat{\subsection}{\bfseries}{\thesubsection}{.3em}{}
\titlespacing*{\subsection}{0pt}{*3}{*3}
%
\makeatletter
\def\@maketitle{%
  \newpage
  \null
  \vskip 2em%
  \begin{center}%
  \let \footnote \thanks
    {\fontsize{18}{22}\fontseries{b}\selectfont \@title \par}%
    \vskip 1.5em%
    {\normalsize
      \lineskip .5em%
      \begin{tabular}[t]{c}%
\@author
      \end{tabular}\par}%
    \vskip 1em%
    {\large \@date}%
  \end{center}%
  \par
  \vskip 1.5em}
\renewenvironment{abstract}{%
\if@twocolumn
\section*{\abstractname}%
\else
\quotation
\noindent{\bfseries\large \abstractname\vspace*{.3ex}\par}
\fi}
{\if@twocolumn\else\endquotation\fi}
\makeatother
% Header/Footer formatting
\renewcommand{\headrulewidth}{0pt}
\renewcommand{\footrulewidth}{0pt}
\fancypagestyle{plain}{%
\fancyhf{} 
%
%  *************
%  ADD DOI BELOW
%  *************
%
\fancyhead[L]{\small \MakeUppercase{\hspace*{15mm} 11$^{\mbox{\tiny th}}$ European Conference for Aeronautics and AeroSpace Sciences (EUCASS)} \\ \quad \\ DOI: ADD DOINUMBER HERE}
\fancyfoot[L]{\small Copyright \copyright\ 2025 by ADD AUTHORS. Published by the EUCASS association with permission.}%
} 
\pagestyle{fancy}
\fancyhf{} 
%
%  *************************************
%  ADD A SHORT TITLE OF YOUR PAPER BELOW
%  *************************************
%
\fancyhead[LE]{\small \MakeUppercase{Short Paper Title}}%
\fancyhead[RO]{\small \MakeUppercase{Short Paper Title}}%
\fancyfoot[LE,RO]{\thepage}
%
\begin{document}
%
%
%  LIST PAPER TITLE, AUTHORS AND CONTACT INFORMATION
%
%  Add $^\dag$ to identify corresponding author
%
%
\title{Paper Title}
\author{\itshape First Author$^\star$ and Second Author$^{\star\dag}$ \\
\itshape$^\star$Author Organization\\
\itshape Address \\
First Author Email $\cdot$  Second Author Email\\
$^\dag$Corresponding author}

\date{}
\maketitle
\begin{abstract}
  \noindent 
This document is the layout template to be used for the 11th European
Conference for Aeronautics and Space Sciences which will take place in
Roma, Italy, from 30 June to 4 July 2025. The easiest way to proceed
is to simply insert your paper directly into this template. Please
follow precisely these instructions, so that all papers have a similar
presentation. The abstract should be limited to a maximum of 100
words. It must summarize the paper in an explicit way, in particular,
the methods used, the main results, and the conclusions. The paper
abstract and title must faithfully reflect its content.
\end{abstract}

\section{Introduction}

This example illustrates the paper layout and presents the various
requirements that you should respect before submitting your paper. The
papers will be typeset on A4 paper with top, lateral and bottom
margins of 30, 22 and 25 millimeters, respectively. A single column
format is to be used. The paper should be typeset in either Times or
Times New Roman font, 10 point size. The section and subsection titles
should be typeset according to the format and weight of the present
template.  

%
%
%
\subsection{Equations}

Equations must be centered and right numbered.  An empty line must be inserted
before and after the equation.

\begin{equation}
\frac{\partial \rho}{\partial t} + \frac{\partial \rho u_i}{\partial x_i} = 0
\end{equation}

\noindent Be sure that the symbols in your equation are defined before or
immediately following the equation or add a nomenclature.

%
%
%
\subsection{Mathematical formulas inserted in the text}

Simple fractions inserted in the text must include parentheses where
needed to avoid any confusion, for example to distinguish between
$1/(n-1)$ and $1/n-1$. Fractions must be aligned in the text using the
slash (/) symbol, except for fractions such as $\frs{1}{2}$. Besides,
oversized symbols must not be used.

%
%
%
\subsection{General recommendations regarding notations}

{\bf Notations} must be legible, clear, compact and consistent with
the usual standards. In general, acronyms should be defined when first
used.

\noindent {\bf Radical signs.} Oversized radical signs should be avoided
whenever possible through the use of the $\frs{1}{2}$ exponent
notation. For example, replace by $\sqrt{(a+b)(a-c)}$ by
$\left[(a+b)(a-c)\right]^{1/2}$.

\noindent {\bf Exponential signs.} Avoid exponential signs such as $e^{jkl}$. Use
instead the alternative notation $\exp$, {\it e.g.\/} $\exp(jkl)$.

\noindent {\bf Multiplications.} In general, typeset multiplications as
$p_y t_{to}$. Use the cross symbol $\times$ if the multiplication sign is really
essential ($1 \times 10^2$) or to indicate the continuation of an equation.
Use the centred dot for scalar products only $(k\cdot k)$.

\noindent {\bf Units.} Use SI units and conventions whenever
appropriate. The value and the unit symbol shall be separated by a
non-breaking space. Symbols for derived units formed by multiplication
are joined with a centre dot ($\cdot$) or a non-breaking space, {\it
  e.g.\/} N\,m, while symbols for derived units formed by division are
joined with a solidus (/) or given as a negative exponent, {\it
  e.g.\/} m/s or m\,$^{-1}$.

\noindent {\bf Decimal marker.} The symbol for the decimal marker
shall be the point on the line.

\noindent {\bf Thousands separators.} Commas or periods must not be
used as a thousands separator in order to reduce confusion resulting
from the variation between these forms in different countries. In
contrast, thin spaces should be used as a thousands separator
$(10 \,\, 000 \,\, 000)$ or the number of digits might be reduced using the
prefixes for the SI units.


%
%
%
\section{Figures and tables}

Particular care should be observed for the preparation of diagrams and
figures. Colour should be used only when it helps improve
understanding. Figures must be centered. Captions must be typeset in
10 point size and the first letter must be capitalized. Please do not
include captions as part of the figures and do not put captions in
separate text boxes linked to the figure.

\begin{figure}[!h]
\centering
\includegraphics[height=60mm]{figure.jpeg}
\caption{Example}
\end{figure}

\noindent {\bf Tables} must be numbered. Table captions must be compact and
positioned above the table. Detailed explanations or notes must be
placed directly under the table as in the following example. Tables
must include horizontal rules to clearly indicate the table limits and
the column headers. In general, no other rules should be used.


\begin{table}[!h]
\centering
\caption{This is a table example}
\medskip

\begin{tabular}{lccc}
 & \bf Case 1 & \bf Case 2 & \bf Case 3 \\
\hline
Observation        & 10        &  13  & 5  \\
Relative frequency & 0.198$^a$ & 0.2  & 0.1 \\
\hline
\multicolumn{4}{l}{$^a$Remark of comment}
\end{tabular}
\end{table}

%
%
%
\section{Compiling paper using \LaTeX and BiBTeX}

The paper can be compiles using pdflatex.
References can be included using BiBTeX.  For example, 
``$\ldots$ the shock train and pseudo-sock phenomena investigated
by Matsuo et al\cite{Matsuo1999} $\ldots$''. 

%
%
%
\section{Paper length/file size}

The paper should not exceed 15 pages. Please upload your file in plain
portable document format (pdf) only, i.e. the file should not be
protected nor in any other format. The submitted pdf file should not
exceed 5~Megabytes. If your file is much larger, there is probably a
figures resolution problem. This should be fixed when creating the pdf
file. The editorial team will take care of protecting the paper after
verification of the layout.

%
%
%
\section{Acknowledgments}

Add acknowledgments here

%
%  bibliography
%
\bibliography{ExampleBiBTeXFile}
\bibliographystyle{plain}

\end{document}
