Energy Autonomous Wireless Smart Systems

MICRO-617

EFM32 Exercise on Low Power System DesignRemark wh...

This page is part of the content downloaded from EFM32 Exercise on Low Power System DesignRemark wh... on Wednesday, 25 December 2024, 15:56. Note that some content and any files larger than 50 MB are not downloaded.

Description

EFM32 Exercise on Low Power System Design

Remark when carrying out the lab in ELG022:

The Simplicity Studio V4 IDE should be installed on the computers in this room.
On some of them the board may not be recognized by the software. In that case, execute the installation for the JLINK driver under C:\SiliconLabs\SimplicityStudio\v4\developer\adapter_packs\installers\Segger_JLink : "dpinst_x64". After this you may need to unplug the board, restart the IDE, and then re-connect the board.